principle:
1. When the can is filled from the upper channel and flows into the sealing machine.
2. The can sealing machine that brings the cans into after the six-prong rotation. The jar is capped by an automatic cap dropper.
3. The six forks continue to rotate to the next station, and the curling knife begins to pre-curling.
4. Six forks continue to rotate to the next station. The second crimp is pressed against the edge.
5. Finished product output.
The motion control method of the automatic sealing machine is:
(1) A pneumatic manipulator driven by a servo motor with a rotatable angle of 360° (with a photoelectric sensor to confirm the starting point 0);
(2) The screw assembly is driven by the stepper motor to move the manipulator along the x and y axes (with limit switches for the x and y axes);
(3) The turntable mechanism that can circulate 360° can drive the manipulator and the reputable screw group to rotate freely (the electric drive part is composed of a DC motor, an automatic can sealing machine photoelectric encoder, a proximity switch, etc.);
(4) The rotating base mainly supports the above 3 parts;
(5) The opening and closing of the air-controlled manipulator is controlled by air pressure (the manipulator is released when the inflator is inflated, and the manipulator is released by the deflation). Its working process is: when the goods arrive, the manipulator system starts to move; the stepper motor control starts to move downwards. The principle of liquid filling machine is usually divided into atmospheric filling machine, vacuum filling machine and pressure filling machine. , The automatic sealing machine can implement self-flow filling according to the weight of the liquid. The filling method is to fill at higher than atmospheric pressure. The pressure in the liquid storage tank is higher than the pressure in the bottle, and the beer liquid depends on the pressure difference. Flowing into the bottle, the many important part of the filling machine is the PLC control system. The liquid filling machine of the automatic sealing machine adopts the Mitsubishi plc position shift instruction to drive the fulfillment condition input every time it changes from off-on, it fulfills n2 Move, n2 is the number of bits to move.
When using the automatic sealing machine, the user needs to prepare a high-position large tank with a valve and output connector at the bottom. The bottom of the large tank should be higher than the automatic sealing machine, and the top valve of the machine should be connected with a hose. Connect the motor of the machine to the 220v power switch (the electrical switch is provided by the user) and connect the body shell to the ground wire.
After the automatic can sealing machine is installed, check whether there is any looseness in each part, whether the top valve is dexterously up and down, after checking everything is normal, open the empty car for trial operation, the rotation direction of the whole machine is set to rotate clockwise before leaving the factory . Adjust the height of the bottle through the lifting mechanism. The filling level is reached by adjusting the length of the filling tube.
The transmission part of the automatic can sealing machine is driven by a motor through a pulley and a triangle belt to drive the reducer gear and the large gear of the can sealing machine to rotate, thereby driving the whole machine to rotate. Maintenance and maintenance In order to make the equipment have the good reliability and longevity, regular maintenance is necessary to keep the equipment in the good condition.
It should be stopped during repair and maintenance. The automatic sealing machine is transported to the site to check whether there are damages and missing parts in each part. The state is generally rotary, with 14-18 filling nozzles, and the output is 1500-3000 bottles/hour (calculated by 750ml) , The siphon filling machine is a semi-automatic filling, manual loading and unloading of bottles, automatic filling, and a bottle washer, a bottle washer, a light inspection, a stopper, a rubber cap heat shrinking machine, a sealing machine, etc. to form an assembly line. Negative pressure filling machine has rotary type and linear type. Wine generally uses rotary type, with 12, 16, 18, 24, 32 filling nozzles, and the output is generally 1500-6000 bottles/hour (calculated by 750ml). Negative pressure filling machines are generally compatible with flip-washing machines, light inspections, automatic stoppers, automatic rubber cap heat shrinking machines, automatic labeling machines, inkjet printers, carton sealing machines and other supporting applications. Turn-over bottle washer and automatic stopper are made into automatic sealing machine to improve the equipment level.
+86 13666712509
English
русский
عربى
Contact Us