Preparation work before using the small can seamer

Four preparations for the start-up of the small can seamer:

(1) The electric device in front of this new machine uses electromagnetic safety switches to reduce the risk of power failure.

(2) Focus on the motor steering. If the steering fails, you can transfer to Line 3 at any line connection position, and the steering can be changed

(3) Focus on positive new air-conditioning systems. The nut under the "foot tank support hinge ear" of the sealing machine, so that the pedal is stepped down, and the push rod "supports the pot shaft and the edge of the lower cam. "A tangential direction on the side of the "scroll" is medium. As the interval is insufficient, the rolling seal cannot be activated. If the interval is too large. Repeated rolling seal, can not actively and the tank, or hold the tank with uneven strength, the oil tank. Hold it by hand. On the other hand, the plate is loosened with the “bowl shaft adjustment bolt.” Foot pedal. "." "" CD-ROM for overhead tank. Put the distance between the height of the upper end cap of the protruding part of the tank, the air-conditioning "holding tank plate" and "rolling", not minus 1/8", "now" bolted.

(4) Adjust the gap between the winding roll and the rolling head. China's food packaging machinery is a stand-alone machine, with low technological content and automation, and the use of new technologies, new processes, and new materials is small, which cannot meet the needs of the development of my country's food enterprises.