Web Menu

Product Search

Language

Share

Home / News / Product Knowledge / Skill development of can sealing machine

Skill development of can sealing machine

Can sealing machine A new type of rotary active can sealing machine is a machine for active sealing of glass cans. It adopts an electromagnetic friction clutch installed on the shaft sleeve to actively adjust the tightening force through the control circuit, and the sealing head shaft can actively fall and Lift up to clamp and grasp the cap. Active can sealing machine In addition to the correct control of the sealing torque of the bottle cap, this machine can also control the sealing change status at any time through the torque meter installed on the panel, which defeats the rare can sealing machine that cannot control the sealing change status at any time. It overcomes the defects that the rare can sealing machine cannot control the sealing torque change at any time, the adjustment is troublesome, and the consumption pass rate is poor. Task parameters can be easily designed and changed on the touch screen according to the sealing request of different round can types. One-fold seam seam sealing is the same as the seaming operation of the first and second sealing wheels, so that the can body flanging and the can lid hook are hooked and twisted, and they are compressed and sealed in parallel to form a tight five-layer horse. mouth Can sealing machine For iron seams, the first sealing wheel is important to make the flanging of the can body and the hook edge of the can cover bend and hook well under the overlapping condition, and the second sealing wheel is applied after the initial seam mentioned above. Pressure tightly sealed. The symmetrical first and second structure make the sealing quality of the big can more stable. Equipped with a vacuum system, the tank can be vacuumed, eliminating the need to equip the exhaust box, increasing the cost of the product and extending the shelf life of the can. When market competition enters a higher degree of product packaging, diversified nature becomes a highly topical topic. Such as a beverage filling line, the active sealing machine is composed of microcomputer parts, control software, filling and capping supporting combination, and the actual consumption power is combined with practical technology. Suppliers can provide users with engineering design, installation, commissioning, and finally hand over to users for acceptance. For example: Jinan Xunjie packaging machinery design is to make extensive use of simulation design techniques to combine various machine units with Can sealing machine The database situation is stored in the computer, the drawings are digitized and output to the computer, and then the indicators and data of practical consumption, and the failures that can occur are output to the computer, and then the engineer will operate according to the actual task status to demonstrate the consumption ability and waste products. Rates, matching of consumption links, and where is the bottleneck of the consumption line, etc., can also be modified according to users’ opinions until users are satisfied.
Previous Post The design principle of the can making mold of the can making equipment

Contact Us

Related Products

Categories
Contact Us