Can sealing machine Under the guidance of the market, it has been greatly developed. Recently, a new type of automatic can sealing machine has been developed in the market. The new type of can sealing machine is more intelligent than the previous one, and the speed is faster, which improves the work efficiency by another level. Then, the new type What is the design concept of the sealing machine?
A new type of rotary automatic sealing machine is a machine for automatic sealing of glass jars. It adopts an electromagnetic friction clutch installed on the shaft sleeve to automatically adjust the tightening force through the control circuit. The sealing head shaft can automatically lower and Raise to clamp and loosen the cap.
Automatic can sealing machine This machine can not only accurately control the sealing torque of the bottle cap, but also can grasp the changes of the sealing at any time through the torque meter installed on the panel, which overcomes the inability of the common sealing machine to grasp the changes of the sealing at any time. It overcomes the shortcomings that the common can sealing machine cannot grasp the can sealing torque change at any time, the adjustment is troublesome, and the production qualification rate is poor. The working parameters can be easily designed and changed on the touch screen according to the sealing requirements of different round cans. One-fold seam seam sealing is the same as the seaming operation of the and second sealing wheels, so that the flanging of the can body and the hook side of the can cover are overlapped and bent, and compressed and sealed to form a tight five-layer tinplate. Seam, the sealing wheel mainly makes the flanging of the can body and the hook edge of the can cover bend and hook well under the condition of overlapping, and the second sealing wheel applies pressure after the formation of the above-mentioned initial seam. Seal tightly.
The symmetrical structure of the and second channels makes the sealing quality of the large cans more stable. Equipped with a vacuum system, the tank can be vacuumed, eliminating the need for an exhaust box, reducing product costs and extending the shelf life of the can. When market competition enters a higher level of product packaging, diversification naturally becomes a high topic. Such as a beverage filling line, the automatic sealing machine is composed of microcomputer parts, control software, filling and capping supporting combination, and the actual productivity is combined with theoretical technology. Suppliers can provide users with engineering design, installation, commissioning, and finally hand over to users for acceptance. For example: Jinan Xunjie packaging machinery design will generally use simulation design technology to store various machine units in the computer in the form of a database, digitize the drawings and enter the computer, and then enter the actual production indicators and data, and possible failures, etc. into the computer. The engineer will then operate according to the actual working conditions to demonstrate the production capacity, rejection rate, production link matching, and where the bottleneck of the production line is. The model can also be modified according to user comments until the user is satisfied.
+86 13666712509
English
русский
عربى
Contact Us