Talking about the seven adjustment steps of the can sealing machine

1. Motor power: 0.37kw 380/220v 50hz

2. Consumption efficiency: 1200 bottles/hour

3. Standard bottleneck: polyester plastic bottle diameter 26mm

4. Bottle mouth diameter: polyester plastic bottle diameter 26—48mm. Special bottle shape can be customized. Glass bottle can be processed according to sample cap

5. Application bottle height: 160-320mm. Special bottle shape can be customized. Glass bottles follow the bottle shape processing. Can sealing machine

6. Rotation direction: right-handed

7. Size: 600*400*1470mm Bracket positioning plate adjustment: jog the switch to lower the head to the bottom dead center. At this time, the lower end surface of the head should keep a distance of 3-5mm from the upper end surface of the support bracket positioning plate, and move up Open the head, put the glass bottle in, close the lid, the head will fall automatically, screw the bottle cap, take out the bottle to check the tightness of the cap, if it is too loose, move the tray upward; if it is too tight, move the tray downward until the tightness So far, the can sealing machine is a mechanical structure, part of which adopts imported parts, and it is easy to adjust. Can sealing machine my country is the world's largest consumer of plastic machinery, but the export value has only accounted for 5% to 10% of the total sales value for many years. This is very much compared with the export value of plastic machinery countries such as Italy, which accounts for about 50% of its total output value. not matched. According to my country's current consumption capacity and export potential of plastic machinery, increasing exports should be one of our basic prospects for further development. We must be short of the opportunities brought about by the birth of the world, strive to invent conditions, increase exports, in order to expand the space for development of my country's plastic machinery industry.