Failure analysis of can sealing machine

Any machine will fail in long-term use, Can sealing machine It is no exception. In industrial production, what faults occur in the sealing machine. Here is a brief introduction to the causes and treatments of the two major faults that are prone to occur in the long-term use of the sealing machine.

1 Irregular marks appear at the sealing area. This is a common fault. It is because there are many irregular uneven marks on the cold press machine. As time accumulates, the sealing machine will absorb dust and other substances when it is working. It will stick to the sealing machine, causing uneven heating of the sealing machine, resulting in bubbles. The way to deal with this kind of failure is very simple, we only need to clean the sealing machine regularly or replace the cold glue machine.

2 The sealing is not strong enough. Products with poor sealing can easily enter the product, which shortens the shelf life of the product, causes losses to manufacturers, and causes inconvenience to everyone's citation. Therefore, the weak sealing is a very important fault of the sealing machine. This situation manyly occurs because the pressure of the cold-pressed rubber wheel is not suitable, the heat-seal speed is too fast or the temperature is not enough. At this time, you only need to increase the heat-seal temperature, reduce the heat-seal speed, and increase the cold-pressing glue force. pressure.

http://www.zslekai.com/news/company-news/915.html