The operation process of the sealing machine and its characteristics

automatic Can sealing machine Especially suitable for the back cover of special-shaped gasoline drums. The entire rolling process of the equipment is automatically completed by the machine. The operator only needs to load and take the work piece, step on the pedal once for each can. The can body does not move during the rolling process, which is safe to use. Easy operation and low noise. A new type of rotary automatic sealing machine is a machine for automatic sealing of glass jars. It adopts an electromagnetic friction clutch installed on the shaft sleeve to automatically adjust the tightening force through the control circuit. The sealing head shaft can automatically lower and Raise to clamp and loosen the cap. This machine can not only accurately control the sealing torque of the bottle cap, but also can grasp the changes of the sealing at any time through the torque meter installed on the panel. The canning machine cannot keep track of the canning torque change at any time, the adjustment is troublesome, and the production qualification rate is poor.

Automatic can sealing machine This machine can not only accurately control the sealing torque of the bottle cap, but also can grasp the changes of the sealing at any time through the torque meter installed on the panel, which overcomes the inability of the common sealing machine to grasp the changes of the sealing at any time. It overcomes the shortcomings that the common can sealing machine cannot grasp the can sealing torque change at any time, the adjustment is troublesome, and the production qualification rate is poor. The working parameters can be easily designed and changed on the touch screen according to the sealing requirements of different round cans. One-fold seam seam sealing is the same as the seaming operation of the and second sealing wheels, so that the flanging of the can body and the hook side of the can cover are overlapped and bent, and compressed and sealed to form a tight five-layer tinplate. Seam, the sealing wheel mainly makes the flanging of the can body and the hook edge of the can cover bend and hook well under the condition of overlapping, and the second sealing wheel applies pressure after the formation of the above-mentioned initial seam. Seal tightly.

The automatic sealing machine also has beautiful appearance, compact structure, good synchronization, stable operation of the machine, stable vacuum and nitrogen filling value, and high degree of automation. The operation system of the whole machine is controlled by PLC. The main working parameters can be operated on the touch screen. The production process is carried out in a sealed room, which meets the advantages of pollution-free hygiene requirements for food production.