Precautions for daily maintenance of can sealing machine

The can sealing unit is suitable for filling and sealing steamed cans in the beer and beverage industry. It is an independently developed steam can filling and sealing based on the digestion and absorption of advanced beer can filling and sealing machines at home and abroad. unit. The filling and sealing are designed as a whole, and the filling system of the can sealing machine is powered by the sealing system to ensure the absolute synchronization and coordination of the two. It adopts advanced machinery, electrical appliances, and pneumatic control technology, uses the principle of equal pressure filling, fast filling speed, stable liquid level after filling, low material loss, good sealing quality, stable operation of the whole machine, and beautiful appearance, Convenient operation and maintenance, production speed frequency conversion speed regulation and other characteristics.

Precautions for daily maintenance of can sealing machine:

First, the can sealing machine adjusts the distance between the can support plate and the pressure head: loosen the spare cap on the guide shaft (screw) at the lower end of the can support plate, rotate the can support plate, and take the contact between the pressure head and the lid as the base point, and then Rotate the can tray upwards by 2---3mm, and tighten the spare cap.

Second, adjust the distance between the indenter and the sealing wheel: ly adjust the left and right distance between the indenter and the sealing wheel, based on the 0.5mm distance between the sealing wheel and the indenter, and the indenter and the sealing wheel will not rub against each other, The smaller the distance, the better; adjust the upper and lower distance between the indenter and the sealing wheel, the lower end of the sealing wheel and the upper end of the indenter are subject to the gap that does not contact. Next, adjust the distance between the indenter and the second sealing wheel similarly.

Third, the gap between the pressure head of the can sealing machine and the sealing wheel: can be adjusted according to the hardness of the lid. The iron cover can be adjusted closer. The aluminum cover can be adjusted further. After adjustment, tighten the fixing screws and try to seal 2-------3. After checking that it meets the standards, it can work continuously.

Fourth, every time you change the tank type, you need to change the pressure head and the tank tray according to the size of the lid.

Fifth, mechanical maintenance: the motor is indispensable, the gear transmission part is added with lithium-based lubricating oil once a month, the motor main shaft runs and the tank tray does not rise, adjust, or replace the triangle belt.